PRINTING
4-2 User's Manual
NOTE
• Setting HI IMPACT mode by pressing the HI IMPACT button
is cancelled when you turn off the printer.
• If you wish to have the HI IMPACT mode set on power-on, save
the setting in setup mode.
It has three print modes in this printer.
・STANDARD MODE
・HI SPEED MODE
Horizontally consecutive dots are omitted (LQ), and the printer
stpeed is twice as STANDARD MODE .
・QUIET MODE
The consecutive dots are omitted (LQ).
The print speed is slowed to LQ speed (except for LQ).
Skipping the space (no characters) at higher speed doesn’t work.
To select Print mode:
1. If the PRINT MODE button is pressed at STANDARD MODE
(Both HI SPEED indicator light and QUIET indicator light are
turned off), it becomes HI SPEED MODE. At this time, the HI
SPEED indicator lights.
2. If the PRINT MODE button is pressed at HI SPEED MODE, HI
SPEED MODE is released, and it becomes QUIET MODE. At
this time, the QUIET indicator lights.
SPEED MODE/QUIET
MODE)
To Next Page
Loading...
