PRINTER AND PAPER SPECIFICATIONS
B-2 User's Manual
Print method Impact dot matrix with a 0.21 mm or 0.25mm,
24-wire head
Print direction Bidirectional logic-seeking or unidirectional
seeking
Character cell
Horizontal × vertical
Letter (10 cpi):
36 × 24 dots
Letter (12 cpi):
30 × 24 dots
Report:
18 × 24 dots
Draft:
12 × 24 dots
High-speed draft:
9 × 24 dots
Paper handling
Standard: Friction-feed platen (cut sheets)
Convertible bi-directional tractor on front or
rear
Paper loading by LOAD button Advancing
perforations to tear-off edge by TEAR OFF
button
Parking continuous forms is available.
Optional: Cut sheet feeder(for front or rear)
Tractor unit (for 2
nd
tractor)
Paper type 1 to 5-copies for cut sheet feeder
1 to 9-copies for tractor and paper table
Paper size
Continuous Width: 102-420 mm (4-16.5 in)
Length: 102 mm (4 in) or greater
Cut sheets
(Paper table)
Width: 55-420 mm (2.16-16.5 in)
Length: 70-420 mm (2.76-16.5 in)
(Cut sheet feeder)
Width: 100-420 mm (4-16.5 in)
Length: 70-420 mm for front cut sheet feeder
(2.76-16.5 in)
100-420 mm for front cut sheet feeder
(4-16.5 in)
Note
To use cut sheets exceeding 297 mm in length, the optional large
stacker is required. For detail see Chapter 3.
SPECIFICATIONS
To Next Page
Loading...
