PRINTER AND PAPER SPECIFICATIONS
User's Manual B-3
Paper thickness Up to 0.65 mm (0.026 inch)
Page length
By software Programmable in one line or inch
increments in all emulations
By control panel Depends upon emulations. Default is 11
inches for all emulations.
DPL24C+/XL24E: 3, 3.5, 4, 5, 5.5, 6, 7, 8, 8.5, 11, 11.6, 12,
14, or 18 inches
ESC/P2: 4, 4.5, 5, 5.5, ..., 11, 11.5, ..., 22 inches
Number of copies Up to 8, including the original
Up to 9, including the original
(At HI IMPACT mode)
Paper stack
Cut sheet 100 sheets (A4 size, 1p, 55 kg/m
2
) (The
stack of cut sheets may decrease,
depending upon the various paper
conditions such as quality, the extent of
curl, and storage environment.)
Command sets
(emulations)
Resident Fujitsu DPL24C PLUS
IBM Proprinter XL24E
Epson ESC/P2
Character sets
DPL24C+/XL24E:
• IBM PC character sets 1 and 2 (code
pages 437)
• IBM PS/2 character sets (code pages
and other national character sets (57
+ 2 languages in total)
• Fujitsu character sets (691
characters)
ESC/P2:
• Italic character set Graphics
character sets 1 and 2
• IBM PS/2 character sets (code
pages) and other national character
sets (61 + 2 languages in total)
To Next Page
Loading...
