User's Manual C-1
APPENDIX C COMMAND SETS
COMMAND SETS
This appendix describes printer commands and
their parameters.
This printer has three resident command sets:
• Fujitsu DPL24C PLUS (native command set for Fujitsu DL
series printers)
• IBM Proprinter XL24E
• Epson ESC/P2
Separate programmer s manuals are available for these emulations.
See Appendix A for order information.
Select the same emulation on the printer and in your software. If your
software emulations include DPL24C PLUS, select DPL24C PLUS for
optimum performance.
To Next Page
Loading...
