COMMAND SETS
C-2 User's Manual
This section describes the printer commands for the DPL24C PLUS
command set which is the native command set of this printer.
Function Command
Print Mode Control
Double-strike (bold) printing on
Double-strike (bold) printing off
Emphasized (shadow) printing on
Emphasized (shadow) printing off
Italic printing on
Italic printing off
Select character style and screening
n
1
= 0:Normal
1:Outline
2:Shaded
3:Outline and shaded
4:Thin outline
5:Thin shaded
6:Thin outline and shaded
n
2
= 0:Transparent
1:Light dot matrix
2:Heavy dot matrix
3:Vertical bars
4:Horizontal bars
5:Slants
6:Back slants
7:Lattice
One-line double width characters on
One-line double width characters off
Double width characters on/off
(on: n = 1, off: n = 0)
ESC G
ESC H
ESC E
ESC F
ESC 4
ESC 5
ESC e S (n
1
) (n
2
)
SO or ESC SO
DC 4
ESC W (n)
PLUS
To Next Page
Loading...
