USING SETUP MODE
User's Manual 5-33
Table 5.4 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E
and Epson ESC/P2 emulations. The notes are defined at the end of
the table.
MENU1 and
MENU2 Items
Options Description
<INT-MEC> ENABLE Mechanical initial is operated by receiving a
reset command.
DISABLE Mechanical initial isn’t operated by receiving
a reset command.
<==END==> Indicates the end of MENU1 items. Press
the button to print the first item,
<EMULATE>. Press the button to print
the previous item, <INT-MEC>. Press the
ONLINE button to reprint the
<<FUNCTION>> menu.
*1 Unavailable in the IBM XL24E emulation
*2 Unavailable in the Epson ESC/P2 emulations
*3 Available only in the Epson ESC/P2 emulations
*4 Available only in the DPL24C+ emulation
*5 Available only in the IBM XL24E emulation
To Next Page
Loading...
