USING SETUP MODE
User's Manual 5-39
Table 5.5 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
Options Description
<PROTOCL> Indicates data transmission protocol.
XON/XOF The DC1 and DC3 codes are used.
DTR The Data Terminal Ready signal is used.
REV-CHL The Reverse Channel signal is used.
<DSR> DETECT DSR is detected by the printer.
IGNORE DSR is ignored by the printer.
<DUPLEX> FULL Simultaneous data transmission occurs in
opposite directions.
HALF Data transmission occurs in either direction,
but not simultaneously.
<CTS> DETECT CTS is detected by the printer.
IGNORE CTS is ignored by the printer.
<CD> DETECT CD is detected by the printer.
IGNORE CD is ignored by the printer.
<==END==> (LED only)
Indicates the end of the HARDWRE item
list. Press the button to print the first item,
which is <PPR-OUT>.
Press the button to print the previous item.
Press the ONLINE button to reprint the
<<FUNCTION>> menu.
To Next Page
Loading...
