Fujitsu DL7600Pro - Page 249

COMMAND SETS
User's Manual C-11
Function Command
Copy resident font to download area
m = 0:Courier 10
1:Prestige Elite 12
2:Draft
3:Compressed
4:Boldface PS
5:Pica 10
6:Correspondence
7:High-speed Draft
n = 0:Downloaded font 0
1:Downloaded font 1
Create download font
• m (bits 4 and 5: Specifies the quality of
characters to be registered)
Bit 5 Bit 4 Font quality selection
0
1
1
1
0
1
Letter (360 dpi)
Correspondence (180 dpi)
Draft (120 dpi)
• m (bit 0: Specifies external font number
to be registered)
ESC : NUL (m) (n)
ESC & (m) (Cs)
(Ce) (data)
Bit 0 Font number selection Remarks
0 Downloaded font 0 At power on, resident font 0 is
automatically downloaded.
1 Downloaded font 1 At power on, resident font 1 is
automatically downloaded.
• m (bits 1, 2, 3, 6, 7) Not used (don’t care)
• Cs (Download start character, ASCII code)
• Ce (Download end character, ASCII code)
Decimal
00 < Cs, Ce < 255
Hex 00 < Cs, Ce < FF
Precaution: Ce ≥ Cs
• data (More than one byte of data
containing bit map data)
(Reserved)
ESC e D (data);