2 Display the [Add Drive Enclosure] screen.
(1) In the [Storage] screen of [Component], click [Add Drive Enclosure] in [Action].
The [Add Drive Enclosure] screen appears.
(2) Select which DE-ID to connect the additional drive enclosure to and the type of drive enclosure that
is to be added in "Target Drive Enclosure", and then click the [Next>>] button.
• Type
Select the type of drive enclosure that is to be added.
- 2.5" 24DE
2.5" type drive enclosure
- 3.5" 12DE
3.5" type drive enclosure
- 3.5" 60DE
High-density drive enclosure
A screen that shows which DE-ID the additional drive enclosure is to be connected to, the type of
drive enclosure that is to be added, and the procedure to add the drive enclosure is displayed.
4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
46 Operation Guide (Basic)
To Next Page
Loading...
