Item Description Setting/Value Factory Default
- : No settings/values
[ ] or [ ] button at the same time when
[Ready] is displayed.
Note that the [Hopper Level] screen is not
displayed unless the two buttons are
pressed simultaneously.
To display the [Paper Separation Force]
screen by shortcut key, press the [
] or
[ ] button when [Ready] is displayed.
19: Language Specify the language in which data is
displayed.
1: Japanese
2: English
3: French
4: German
5: Italian
6: Spanish
7: Russian
8: Chinese (S)
9: Chinese (T)
10: Portuguese
11: Turkish
12: Korean
13: Arabic
2: English
20: Prioritize
Panel Settings
Prioritize the operator panel setting for
Paper Protection.
When [1: Paper Protection] is selected, the
Paper Protection setting of the operator
panel is prioritized.
When [2: Clear] is selected, the Paper
Protection setting is no longer prioritized.
1: Paper Protection
2: Clear
2: Clear
21: Cleaning Use this setting when you clean the
scanner.
For more details, refer to Daily Care (page
115).
1: Sheet
2: Wipe
—
22: Test Print Use this option to run a test print when the
Imprinter is installed.
For more details, refer to the
"fi-680PRF/PRB Imprinter Operator's
Guide".
No. of sheets scanned:
1: Single sheet only
2: Multiple sheets
Print: (*4)
1: Front Side
2: Back Side
Print Pattern:
(*3)
How to Use the Operator Panel
93
To Next Page
Loading...
