Item Description Setting/Value Factory Default
- : No settings/values
12: Alarm
Sound Time
Specify the duration to ring the alarm in
when errors such as multifeed and paper
jam occur.
0.5, 1, 1.5, 2.0, 2.5
(seconds)
2.0
13: Button
Sound Vol
Specify whether or not to make a sound
when a button on the operator panel is
pressed.
1: OFF
2: Low
3: High
(ring time fixed at 0.01
seconds)
1: OFF
14: Contrast Specify the contrast for the LCD on the
operator panel.
Weak ←→ Strong
15: Backlight
ON
Specify the duration for which the
backlight is ON.
Until initialization is complete after
turning the power on, this item operates in
[ON] regardless of the setting configured.
OFF, ON, 5, 10, 20, 30, 40,
50, 60, 90, 120, 150, 180,
210, 240, 270, 300
(seconds)
ON
16: LED Blink
Cycle
Specify the interval in which the Check LED
flashes when (for Information) is
displayed on the LCD.
0.5, 1.0, 1.5, 2.0, 2.5
(seconds)
2.0
17: Horizontal
Scroll Speed
Specify the speed at which the display is
horizontally scrolled.
The displayed item is scrolled horizontally
when the text does not fit in the LCD.
1: Fast
2: Normal
3: Slow
4: OFF
2: Normal
18: Operation
Panel Timeout
Specify the time to return to the [Ready]
screen from [Hopper Level] or [Paper
Separation Force].
Note that this option is only available
when you display [Hopper Level] or [Paper
Separation Force] from the [Ready] screen
by using a shortcut key.
To display [Hopper Level] by shortcut key,
press the [Eject] button and either the
OFF, 5 to 9 (seconds) 7
How to Use the Operator Panel
92
To Next Page
Loading...
