Fujitsu Primergy RX300 S2 User Manual

304
C Using the Server Management Port
Entering "0" exits the remote control function and displays the prompt.
table: Description for each menu
Menu Operation
Immediate Power Down Turns the server off. Enabled only when the server is
turned on.
Immediate Reset Resets the server. Enabled only when the server is
turned on.
Graceful Power Down Shuts down the OS and turns the server off.
ServerView must be installed. Enabled only when the
server is turned on.
Power Cycle Turns the server off and back on again. Enabled only
when the server is turned on.
Power On Turn the server on. Enabled only when the server is
turned off (stand by).
View System Eventlog(SEL) Displays the system event logs.

Fujitsu Primergy RX300 S2 Specifications

General

Processor Sockets	2
Chipset	Intel 5000P
Network	2 x Gigabit Ethernet
Form Factor	2U Rackmount
Processor	Intel Xeon 5000/5100/5300 series
Storage	SAS or SATA HDD 2.5"/3.5"
RAID Support	Optional RAID controller
Operating System Support	Windows Server, Linux
Power Supply	Redundant power supply optional