Basic Scanning Operation Flow (for Windows Users)
115
2. Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to "Right-Click Menu (Windows)" (page
37).
D The ScanSnap setup dialog box appears.
3. Select the [Use Quick Menu] check box.
4. Click one of the profile buttons.
5. Click the [OK] button to close the ScanSnap setup dialog box.
HINT
z The [Recommended] button is selected in default.
z For details about the default settings when using the Quick Menu, refer to the ScanSnap
Manager Help.
To Next Page
Loading...
