Profile (for Windows Users)
213
4. Click the [Close] button to close the [ScanSnap Manager - Profile
Management] dialog box.
How to Perform a Scan
This section explains how to use profiles to perform scanning.
The following explains an example in which the scanned image file is saved to ScanSnap
Organizer.
1. Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to "Right-Click Menu (Windows)" (page
37).
D The ScanSnap setup dialog box appears.
2. Clear the [Use Quick Menu] check box.
3. Click the [OK] button to close the ScanSnap setup dialog box.
To Next Page
Loading...
