Fujitsu ScanSnap iX500

System Requirements
74
Mac OS
* : It is recommended to apply the latest updates to the Mac OS.
Operating
system (*)
OS X v10.8 (Recommended: 10.8.1 or later)
Mac OS X v10.7 (Recommended: 10.7.4 or later)
Mac OS X v10.6 (Recommended: 10.6.8)
CPU
Intel
®
Core™2 Duo 2.4 GHz or higher
(Recommended: Intel
®
Core™ i5 2.5 GHz or higher)
Memory
2 GB or more (Recommended: 4 GB or more)
Display
Resolution
1024 × 768 pixels or higher
Hard disk
space
Free space required to install the software bundled with the ScanSnap is as follows:
z ScanSnap Manager: 980 MB
z CardMinder: 570 MB
z ABBYY FineReader for ScanSnap: 590 MB
z ScanSnap Online Update: 10 MB
z ABBYY FineReader Express: 220 MB
z Evernote for Mac: 80 MB
USB port
USB 3.0 / USB 2.0 / USB 1.1
ATTENTION
z If the system requirements above are not satisfied, the ScanSnap may not operate.
z Do not use the USB port on the keyboard or the monitor to connect the ScanSnap (it may not function
properly).
z Make sure to use a powered hub equipped with an AC adapter if you are using a commercially
available USB hub.
z Scanning speed will slow down in the following cases:
- The CPU or the memory does not meet the required specifications
- The version of the USB port or the USB hub is USB 1.1
z A disk space approximately three times larger than the resulting scanned file size is required when
scanning documents.