Fujitsu ScanSnap iX500

Profile (for Windows Users)
204
How to Configure Scan Settings
You can configure scan settings depending on your intended use of the scanned images.
The scan settings can be configured in the ScanSnap setup dialog box.
For details about how to configure scan settings, refer to "How to Configure Scan Settings"
(page 268).
Profile Management
For details about how to add, change or delete profiles, refer to the following:
z To add a profile (→ page 204)
z To change scan settings for profiles (→ page 208)
z To rename a profile (→ page 210)
z To delete a profile (→ page 212)
Adding Profiles
1. Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to "Right-Click Menu (Windows)" (page
37).
D The ScanSnap setup dialog box appears.
HINT
Clear the [Use Quick Menu] check box if it is selected.