Configuring ScanSnap Manager (for Mac OS Users)
421
Configuring ScanSnap Manager
This section explains how to set scan and Quick Menu settings, automatic linkage with
applications, scanning progress status, and windows displayed during scanning.
How to Configure Scan Settings
You can configure ScanSnap Manager scan settings depending on your intended use of the
scanned images. Scan settings can be configured using the ScanSnap setup window.
You can configure scan settings for the following scanning methods.
z Basic Scanning Methods
Scanning using the Quick Menu (page 286)
z Convenient Scanning Methods
Scanning using a profile (page 369)
Configure scan settings in the following procedure.
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu
(Mac OS)" (page 39).
D The ScanSnap setup window appears.
HINT
You can also open the ScanSnap setup window by pressing simultaneously the [command ( )] and
[S] keys on the keyboard. This operation is only enabled when ScanSnap Manager is active (when
"ScanSnap Manager" is displayed in the menu bar).
To Next Page
Loading...
