Connecting the ScanSnap to a Wireless LAN
51
3. Connect to the ScanSnap.
Preparation
To connect the ScanSnap to a wireless LAN, prepare the following:
z An environment in which a wireless LAN is available
When connecting the ScanSnap to a wireless LAN, you may need information for a
wireless access point such as an SSID (network name) and a security key (password).
For details, refer to the manual for the wireless access point.
z ScanSnap Connect Application (when connecting the ScanSnap to a mobile device)
Install ScanSnap Connect Application on the mobile device that you want to connect.
Download ScanSnap Connect Application for the mobile device from an application
store such as iTunes/App Store or Google Play.
z Connect from a computer (→ page 54) z Connect from a mobile device (→ page 55)
ATTENTION
Do not place the following within 100 mm of the ScanSnap, or near your wireless access point.
z Obstacles that block radio waves (e.g. walls or metal plates)
z Devices that cause radio wave interference (e.g. microwave ovens or cordless phones), or
wireless devices
To Next Page
Loading...
