Fujitsu ScanSnap iX500

Configuring ScanSnap Manager (for Mac OS Users)
432
ScanSnap's Communication Status
If you turn the ScanSnap ON/OFF or connect the ScanSnap to a wireless LAN when
ScanSnap Manager is running, a notification appears and displays the communication
status of the ScanSnap.
When the ScanSnap is ON
(When a USB cable is used for connection)
(When a wireless LAN is used for connection)
When the ScanSnap is OFF
HINT
When you use automatic connection for the ScanSnap that had been connected to a wireless LAN before,
if the password for the ScanSnap to be connected has been changed, the notification shown below
appears.
HINT
To disable notifications of the ScanSnap’s communication status, click the notification, and in the [Status
Display] tab of the [ScanSnap Manager - Preferences] window, clear the [Notify of the communication
status] checkbox.