Configuring ScanSnap Manager (for Mac OS Users)
431
ATTENTION
For CardMinder
z When CardMinder is active, scanning is performed with the current settings. If there are some settings
that are not supported by CardMinder, the default settings are used.
For details about CardMinder default settings, refer to the ScanSnap Manager Help.
z While CardMinder is active, ScanSnap Manager automatically links with CardMinder when the
document is of business card size. When documents of other sizes are scanned, ScanSnap Manager
and CardMinder are not automatically linked, and the following error message appears.
HINT
To disable automatic linkage, select [Do not link automatically] in the [Automatic Linkage] tab of the
[ScanSnap Manager - Preferences] window.
To Next Page
Loading...
