Profile (for Mac OS Users)
370
How to Configure Scan Settings
You can configure scan settings depending on your intended use of the scanned images.
Scan settings can be configured in the ScanSnap setup window.
For details about how to configure scan settings, refer to "How to Configure Scan Settings"
(page 421).
Profile Management
For details about how to add, change or delete profiles, refer to the following:
z To add a profile (→ page 370)
z To change scan settings for profiles (→ page 374)
z To rename a profile (→ page 376)
z To delete a profile (→ page 378)
Adding Profiles
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu
(Mac OS)" (page 39).
D The ScanSnap setup window appears.
HINT
Clear the [Use Quick Menu] checkbox if it is selected.
To Next Page
Loading...
