Fujitsu ScanSnap iX500

Connecting the ScanSnap to a Wireless LAN
50
Connecting the ScanSnap to a Wireless
LAN
By connecting the ScanSnap to a wireless LAN, you can scan documents with a computer
or a mobile device. When a mobile device is used, a scanned image can be received directly
to the mobile device.
Follow steps 1 through 3 to connect the ScanSnap to a wireless LAN.
1. Make preparations. (→ page 51)
2. Configure wireless LAN connection settings. (→ page 52)
ScanSnap Connect
Application
ScanSnap Wireless Setup Tool Wizard
z Connecting the ScanSnap to
a wireless access point
z Registering the connected
computer
z Configuring the ScanSnap
settings
z Checking the connection of
a mobile device