Fujitsu ScanSnap iX500

Basic Scanning Operation Flow (for Mac OS Users)
290
Stopping the Scan
You can stop a scan in progress in case you are scanning a wrong document or the wrong
side of a document.
Stop the scan in the following procedure:
1. Click the [Stop] button in the [ScanSnap Manager - Image scanning and
file saving] window which appears during scanning.
D The following window appears when the scanning stops.
2. Click the [Quit] button.
To continue scanning, click the [Continue Scanning] button or press the [Scan] button
on the ScanSnap after loading another document in the ScanSnap.
HINT
Remove all documents from the ScanSnap after stopping the scan. For details about how to remove
documents, refer to "Troubleshooting" in the ScanSnap Manager Help.