Fujitsu ScanSnap iX500

Wireless LAN Specifications
478
Wireless LAN Specifications
The following table summarizes the wireless LAN specifications of the ScanSnap.
*1 : Values depend on your country.
*2 : The values indicated on these standards are the maximum value, and do not indicate actual
communication speed.
*3 : To use the wireless function, you need a wireless access point that supports the same
standards.
*4 : The specifications may vary based on the connected wireless access point and the
surrounding environment.
*5 : You need a wireless access point that supports the WPS function.
Model name
iX500
Observed standards
IEEE802.11b / IEEE802.11g / IEEE802.11n
Frequency (*1)
2.412 GHz to 2.462 GHz / 2.412 GHz to 2.472 GHz
Channels (*1)
1 to 11 ch / 1 to 13 ch
Transfer speed (standard)
IEEE802.11b Max.: 11 Mbps
IEEE802.11g Max.: 54 Mbps
IEEE802.11n Max.: 72.2 Mbps (Only supports 20 MHz
bandwidth) (*2)
Communication mode
Infrastructure mode (*3)
Communication distance
(predicted)
Indoors, 50 m (Recommended: indoors, within 25 m) (*4)
Security
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (64-bit/
128-bit)
Easy installation
WPS 2.0 supported (button / PIN code) (*5)