Using ScanSnap with the Quick Menu (for Windows Users)
147
Procedures
1. Load a document in the ScanSnap.
For details, refer to "How to Load Documents" (page 63).
2. Press the [Scan] button on the ScanSnap to start a scan.
D The Quick Menu appears when the scanning is completed.
To change the settings for [Scan to Rack2-Filer Smart], move the mouse cursor to the
[Scan to Rack2-Filer Smart] icon , and then click . For details about how to
change the settings, "Preferences" (page 149).
ATTENTION
When you perform a scan with [JPEG(*.jpg)] selected for [File format] in the [File option] tab of the
ScanSnap setup dialog box, you cannot save the image in Rack2-Filer Smart.
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap setup
dialog box.
For details about how to perform scanning by using the Quick Menu, refer to "Basic Scanning Operation
Flow" (page 114).
To Next Page
Loading...
