Using ScanSnap with the Quick Menu (for Windows Users)
178
Procedures
1. Load a document in the ScanSnap.
For details, refer to "How to Load Documents" (page 63).
2. Press the [Scan] button on the ScanSnap to start a scan.
D The Quick Menu appears when the scanning is completed.
To change the settings for [Scan to Salesforce Chatter], move the mouse cursor to the
[Scan to Salesforce Chatter] icon , and then click . For details about how to
change the settings, "Preferences" (page 182).
3. Click the [Scan to Salesforce Chatter] icon .
D The [Scan to Salesforce Chatter - Login] dialog box appears.
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap setup
dialog box.
For details about how to perform scanning by using the Quick Menu, refer to "Basic Scanning Operation
Flow" (page 114).
To Next Page
Loading...
