Configuring ScanSnap Manager (for Windows Users)
270
4. Click the [OK] or [Apply] button.
D Scan settings are changed.
z When you use the Quick Menu, scan settings for the [Customize] button are
changed.
z When you use a profile, scan settings for the currently selected profile are
changed.
HINT
If you press the [Scan] button on the ScanSnap while the ScanSnap setup dialog box is displayed,
the ScanSnap setup dialog box closes and scanning starts. Scan settings that you have changed are
saved and documents are scanned by these settings.
Note that when other dialog boxes are open, scanning does not start even if you press the [Scan]
button on the ScanSnap unless open dialog boxes are closed.
To Next Page
Loading...
