Configuring ScanSnap Manager (for Windows Users)
281
When the ScanSnap will be automatically turned off soon
When the time until auto power-off is specified, the notification appears in the notification
dialog box 5 minutes before the ScanSnap turns off.
When connected to a mobile device via wireless LAN
When the ScanSnap and a mobile device are connected via wireless LAN, communication
with ScanSnap Manager is disconnected, and the pop-up balloon notifies you of the
communication status.
HINT
To disable notifications of the ScanSnap's communication status, click the pop-up balloon, and in the
[Status Display] tab of the [ScanSnap Manager - Preferences] dialog box that appears, clear the [Notify of
the communication status] check box.
To Next Page
Loading...
