Fujitsu ScanSnap iX500

Using ScanSnap with the Quick Menu (for Mac OS Users)
328
4. Press the [Scan] button on the ScanSnap to start a scan.
D Scanned images will be sent to the mobile device from the computer when the
scanning is completed.
5. Click the [Close] button to close the [Scan to Mobile] window when
sending of the scanned image is completed.
ATTENTION
To enable automatic linkage with [Scan to Mobile], press the [Scan] button on the ScanSnap and
start a scan while [Scan to Mobile] is active (the Scan to Mobile menu appears on the menu bar).
HINT
When you select the [Wait until the [Send] button is clicked] checkbox in the [Scan to Mobile - Basic]
window, the [Send] button appears in the [Scan to Mobile] window. Click the [Send] button to send
the image to the mobile device.
HINT
The [Scan to Mobile] window closes automatically when the mobile device is disconnected from the
computer.