How to Load Documents
66
7. Load the documents in the ADF paper chute (cover).
Load the documents face-down and top-first with their back facing you. Load the
documents so that they are not beyond the reference marks within the side guides.
ATTENTION
z Do not accumulate more than 50 sheets (with paper weight of 80 g/m² [20 lb]) in the stacker.
z Right-click the ScanSnap Manager icon in the notification area and select [Scan Button
Settings]. Then, select the [Scanning] tab → the [Option] button, to show the [Scanning mode
option] dialog box. If the [Place document face up] check box is selected in the [Scanning mode
option] dialog box, load documents face-up and bottom edge first.
To Next Page
Loading...
