Installing in Windows
82
12.Select whether you want to configure the wireless settings for
connecting the ScanSnap to a wireless LAN.
To configure the wireless settings, click the [Setup Now] button, and then follow the
instructions on the screen. For details of each screen, click the link next to [ ].
Otherwise, click the [Later] button.
13.Remove the Setup DVD-ROM from the DVD-ROM drive.
HINT
If you want to configure the wireless settings for connecting the ScanSnap to a wireless LAN at
another time, refer to "Connecting the ScanSnap to a Wireless LAN" (page 50).
ATTENTION
If the installation is not successfully completed, select [Manuals] → [Troubleshooting (installation)] in the
[ScanSnap Setup] dialog box, and refer to the Troubleshooting (installation).
To Next Page
Loading...
