Fujitsu ScanSnap S300 User Manual

5.2 Saving Data in the Specified Folder
ScanSnap S300 Operator's Guide 97
About Actions
5
Operation
4. Load the document on the ScanSnap.
5. Press the [SCAN] button .
⇒ Scanning is started.
⇒ When scanning is complete, the preview window appears.
Operation
6. Verify a scanned image in the preview window.
You can also change file names and destination folders and specify whether to state a path to
a destination folder in an e-mail message to notify other members of it.
Preview Window
The image of the selected file is displayed.
You can use the following navigation controls for paging through documents:
: To go to the first page, click this First Page button.
For details, refer to sections "3.2 Paper Sizes of Documents to be Scanned"
(page 38) and "3.3 Loading Documents" (page 40).
Preview Window

Fujitsu ScanSnap S300 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
Bundled software	ScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 95 x 77 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)	8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)	2 x 2 \
Minimum RAM	512 MB
Minimum storage drive space	920 MB
Compatible operating systems	Windows 2000 Professional, Windows XP, Windows Vista
Power supply type	AC/USB
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	1400 g