Fujitsu ScanSnap S300 - Using the Scansnap as a Copy Machine

5.4 Using the ScanSnap as a Copy Machine
ScanSnap S300 Operator's Guide 117
About Actions
5
5.4 Using the ScanSnap as a Copy
Machine
This section describes how to print scanned image files with a printer.
By printing scanned images directly from the ScanSnap, you can use the ScanSnap as a copy
machine.
When you scan documents with the ScanSnap, scanned images are printed with a printer.
ATTENTION
• By default, a printer that is [Set as Default Printer] in Windows Control Panel
is used. You might also change settings so that a printer can be selected
after scanning.
• Depending on the document conditions and scanning settings, the printed
image may contain shadows (which appear as lines) on its edges.