5.3 Sending Files by E-Mail
ScanSnap S300 Operator's Guide 103
About Actions
5
■ Operations in Quick Menu Mode
Operation
1. Load the document on the ScanSnap.
2. Press the [SCAN] button .
⇒ Scanning is started.
⇒ When scanning is complete, the ScanSnap Quick Menu appears.
Operation
3. Place the mouse cursor on [Scan2E-mail].
⇒ A description of the [Scan2E-mail] action is displayed.
For details, refer to section "3.2 Paper Sizes of Documents to be Scanned"
(page 38) and section "3.3 Loading Documents" (page 40).
Action List
Descriptions of the selected action
To Next Page
Loading...
