Fujitsu ScanSnap S300 User Manual

190
9.1 Replacing Consumables
This section describes how to replace consumables.
■ Parts Nos. and Replacement Cycle of Consumables
The following tables list the part numbers of consumables and rough guidelines for replacing these
parts.
These replacement cycles are rough guidelines for the case of using A4/Letter wood-free paper 64
g/m
2
(17 lb). So it may differ according to the paper being used.
Use only the consumables specified by PFU LIMITED; do not use consumables made by other
manufacturers.
No. Description P/N
Standard Replacement
Cycle
1 Pad ASSY PA03541-000
2 10,000 sheets or one year
2 Pick roller PA03541-000
1 100,000 sheets or one year

Fujitsu ScanSnap S300 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
Bundled software	ScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 95 x 77 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)	8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)	2 x 2 \
Minimum RAM	512 MB
Minimum storage drive space	920 MB
Compatible operating systems	Windows 2000 Professional, Windows XP, Windows Vista
Power supply type	AC/USB
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	1400 g