60
- Brightness
(Black and White scanning only)
You can set the density for scanning black-and-white images.
Moving the slider control to the left lightens scanned images while moving the
slider control to the right darkens scanned images.
* This setting is valid when [B&W] is selected in the [Color mode] drop-down
list, or when a scanned document is recognized as a black-and-white document
with [Auto Color Detection] selected in the [Color mode] drop-down list.
- Setting for text only document
Mark or clear this checkbox depending on documents.
• Mark this checkbox when scanning documents not containing photographs.
• Clear this checkbox when scanning documents containing photographs.
- Allow automatic blank page removal
When this checkbox is marked, blank pages in a document are automatically
recognized and removed so that the output images include no blank pages.
For example, when both two-sided and one-sided documents are contained in a
batch and the batch is scanned in Duplex mode, this feature removes only the blank
pages of documents.
* No scanned images are output if all pages of the batch of documents are
recognized as blank.
- Correct skewed character strings automatically
When this checkbox is marked, skew is automatically detected and corrected.
Images with up to +/-5 degrees of skew can be corrected.
ATTENTION
The following types of documents may be accidentally recognized as blank.
• Almost blank sheet of paper with a few characters on it
• Plain color sheet of paper (including black)
Before discarding the original documents you have scanned, check the
document images for pages accidentally removed. If any, you may have to
scan the documents again.
ATTENTION
This function detects document skew based on text. Therefore, if the following
types of documents are skewed, the skew may not be corrected:
• Documents on which the pitches of lines or characters are extremely narrow,
or characters are overlapped
• Documents that have many outlined or decorated characters
• Documents that have many photographs or figures but only a few characters
• Documents that have characters on patterned background
• Documents that have characters printed in various directions (e.g. drawings)
• Documents that have long diagonal lines
• Handwritten documents
*When you scan documents above, clear the checkbox.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
