Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
13
In addition, you will need the following tools and accessories
(not included with your machine purchase):
• 3-5 gallons of distilled water
• A ve gallon bucket
• Small Scissors
CAUTION!
You should never operate your laser without a
working exhaust. Full Spectrum recommends exhaust systems
capable of 232 CFM. Keep in mind that exhaust systems with
high ow rates may require xtures for thin materials.
FIRE WARNING! It is important that either rigid or exible metal
ducting be used in the exhaust system. Any type of “soft” ducting
is potentially ammable and should not be used under
any circumstance.
Water BucketDistilled Water Small Scissors
Additional Requirements
To Next Page
Loading...
