Figure 5.1
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
40
Muse’s touch panel allows you to control the basic functions of your laser without needing to connect
to a computer. This is very convenient during alignment and testing procedures. To actually run jobs,
you will need to access the RetinaEngrave 3.0 software (see Installations and Assembly Section.)
HOME MENU
Returns to the main Home
Screen from any sub-screen
JOB HISTORY
Accesses Job History
sub-screen.
SETTINGS
Accesses the Settings
sub-screens.
WATER INDICATOR
Indicates water system
is running properly.
LID OPEN / CLOSE
Indicates lid is opened
or closed.
JOG CONTROLS
Jog gantry via control buttons or
manually.
LOCKED/UNLOCKED
Lock or unlock the gantry
for auto or manual homing
TEST FIRE
Test re the laser. Used for
mirror alignments and testing.
JOG PERIMETER
Laser automatically JOGs the
extent of the current project.
JOG SPEED
Switch from slow jog to fast jog
CAMERA
Instructs camera to
image workbed
E-STOP
Instantly stop any action.
A
B
C
D
E
F
G
I
H
J
K
L
M
N
SECTION V. TOUCH SCREEN INTERFACE
HOME LASER
Instantly homes the laser
RETURN TO POSITION
Return gantry to a custom
assigned position
A
B
C
D
E
F
G
M
H
K
I
J
L
N