Questions? Please Contact Your Local Manufacturer’s Representative
SECTION 3 VTG-IOM-2016-1214 OPERATION
3-13
g) Press the + arrow and .06 will be ashing.
IMPORTANT: “._._” will be displayed to the right of
.06. To access the Output you must PRESS ENTER
and the value will now be displayed. Press ESC (hold
– and + arrows together) to return to the ashing
.06. You have now viewed the data for one error
history.
h) With .06 ashing press ESC (hold – and + arrows
together), now 701 will be ashing. With 701
ashing press the “+” arrow and 702 will be ashing.
Repeat the above steps for each error history up to
the parameter 725.
i) Refer to the Error Code List in the manual.
To Next Page
Loading...
