28. Trackpilot
28-4
9: Trackpilot status indicator: Shows chosen mode and state of readiness.
• Trackpilot in operation: READY
• Trackpilot control mode: HEADING/TRACK
• Trackpilot automatic route steering: ROUTE
• Trackpilot track controlled turn: TURN
10: Trackpilot alarm indicator and buzzer cancel
• ALARM lamp for other Trackpilot-related alarms and errors
• RESET button for acknowledging other Trackpilot-related alarms and errors.
11: Special function keypad
• Selection of manual speed
• Adjustment of panel dimmer
• Set-up of manual speed value, auto speed, rudder limit function, performance and condition
12: Tiller
• Used to set course and radius.
• PORT and STBD lamps show when tiller can be used to set course.
• INCREASE. and DECREASE. lamps show when tiller can be used to set radius or set rudder angle limit.
13: Gyro reading and a bar graph showing rate of turn
14: Set Heading display includes:
• Off course alarm
• Turn side
• Rudder-on limit indication
15: Displays:
• Radius set-point in Radius Control mode
• Rudder limit in Heading Control mode
• AUTO LIMIT lamp lights to indicate selection of automatic rudder limit function.
16: Displays:
• ROT in Radius Control mode
• Speed in Heading Control mode
• Speed warning indicator (LOG FAILURE or LOW)
To Next Page
Loading...
