30. Alarms
30-33
Alarm number 2504: PROGTRACK: USE RADIUS CTRL. /2/9
------------------------------------
THIS IS INSTRUCTION TO CHANGE
STEERING MODE. THIS ALARM IS
GENERATED IF THERE ARE NOT
SUFFICIENT SENSORS AVAILABLE TO
CONTINUE PROGRAM TRACK
Alarm number 2505: ROUTE: USE GOTO WP /2/9
------------------------------------
THIS IS INSTRUCTION TO CHANGE
STEERING MODE. THIS ALARM IS
GENERATED IF THERE ARE NOT
SUFFICIENT SENSORS AVAILABLE TO
CONTINUE GOTO TRACK
Alarm number 2506: ROUTE: USE RADIUS CTRL. /2/9
------------------------------------
THIS IS INSTRUCTION TO CHANGE
STEERING MODE. THIS ALARM IS
GENERATED IF THERE ARE NOT
SUFFICIENT SENSORS AVAILABLE TO
CONTINUE GOTO WP OR GOTO TRACK
Alarm number 2507: ROUTE: NEED SOG/COG REF. /2/9
------------------------------------
'GOTO TRACK' MODE CANNOT CONTINUE
WITHOUT SOG/COG REFERENCE AVAILABLE
FROM POSITION SENSOR OR BOTTOM TRACK
OF DUAL AXIS LOG.
Alarm number 2508: DISABLED: NEED SOG/COG REF. /2
------------------------------------
GOTO TRACK STEERING MODE CANNOT BE
ACTIVATED WITHOUT SOG/COG REFERENCE
AVAILABLE FROM POSITION SENSOR OR
BOTTOM TRACK OF DUAL AXIS LOG
To Next Page
Loading...
