8. Vector Chart Material
8-10
Interpretation of Load or Update Charts from loaded CD ROM dialog box
This window provides information about the loaded CD-ROM. To display this window, open the Chart Menu and
choose Load and Update Charts from the menu and “from loaded CD-ROM” from the sub menu.
1.
2.
3.
5.
6.
4.
North Up TM
ECDIS only
HDG 070.0°
SPD
(CALC)
1.8
Kt
SB
(POSN)
1.7
Kt
COG
(POSN)
045.1°
SOG
(POSN)
2.0
Kt
1. The source and edition date of the CD is displayed here.
2. A list of charts stored in the CD-ROM, edition number of the chart and the number of updates included in the
chart.
3. In the Load Selector field, you can choose how to pick desired charts from the list:
• Name: Chart names are displayed on graphical presentation if selected.
• Permit: Available charts will be highlighted in the CD-ROM and for which you have permits.
• RENC Canceled Charts: The system will display charts on display which are canceled on RENC and
normally on CD-ROM.
• Group: If you have predefined a group of charts the system will highlight those charts in the group which are
available in the CD-ROM.
• Manual Selection: You can highlight desired charts from the list.
• Missing only: loads and display on graphical presentation only charts and their updates which are not already
loaded.
4. The View CD-ROM Publisher Notes button is used to view important notices published by chart producer.
5. The Edit Group button is used to create and modify group.
6. The Load button is used to start loading.
To Next Page
Loading...
