8. Vector Chart Material
8-11
Note 1: If you want to make chart selection by group, click the Group button and choose desired group. If the same
chart exists in both the group and the list, they are highlighted in the list box.
Note 2: The system can make conversion into the SENC and set the “Display Until” date automatically. This is the
recommended way. For how to do this, see paragraph 8.4.2 “Choosing automatic SENC conversion and displaying
until date”.
Note3: You should read the text file associated with each catalogue. The text file typically contains very important
notices for the usage of the charts from the producing Hydrographic Office.
1. Click the View CD ROM Publisher Notes button in the Load or Update Charts from loaded CD ROM
dialog box (see previous page)
2. To close this window, click the X at the upper right corner of the window.
Note4: You can view the summary of the contents of the CD ROM. It contains information about charts you are
going to load.
1. Click the View CD ROM content Summary button on the S57 load window.
2. Date for the selected CD-ROM is displayed.
Cell ID: Name of the chart
Edition: Edition number of the chart
Base: Including update number and issue date of Base cell of the chart
First Update: Update number and issue date of the first update included
Last Update: Update number and issue date of the last update included
3. If you want to make a hard copy of the Content Summary, hit the Print Text button.
4. To close this window, click the X in the upper right corner of the window.
To Next Page
Loading...
