7.3 Cautions and information message
7-11
Messages for information
“208 INF: [DISTRESS] Button switch activated.”
“250 INF: DMC switch activated.”
“251 INF: DMC activation has been canceled.”
“252 INF: DISTRESS ALERT UNIT switch activated.”
“253 INF: DISTRESS ALERT UNIT activation has been canceled.”
*** Distress Button Test ***
“209 INF: [DISTRESS] Button works correctly.”
“237 INF: DMC works correctly.”
“238 INF: DISTRESS ALERT UNIT works correctly.”
“254 INF: Distress Buttons enter into TEST MODE.”
“239 INF: Distress Buttons return to NORMAL MODE.”
“241 INF: Please update current ship position.”
“246 INF: NCS has gone outage. ( RESTORATION Mode )”
“247 INF: You can select preferred LES by Network Information Window.”
“243 INF: Distress Priority Message received.”
“245 INF: Urgent Priority EGC Message received.”
“244 INF: Distress Priority EGC Message received.”
“256 INF: ENID ***** was entered by EGC message.”
“257 INF: ENID ***** was deleted by EGC message.”
“258 INF: DNID ***** was entered by Polling.”
“259 INF: DNID ***** was removed by Polling.”
“260 INF: Pre-set LES ID for DISTRESS ALERT is overriden by LES ***.”
*** Login ***
“017 Successful Login.”
“019 Login failed.”
“020 Login aborted.”
“022 MES Signalling Failure, Login Request not sent to NCS.”
“021 Timeout! Login Acknowledgement not received.”
“024 Login failed because of RESTORATION mode Network.”
*** Logout ***
“025 Successful Logout.”
“026 Logout failed.”
“027 Logout aborted.”
“029 MES Signalling Failure, Logout Request not sent to NCS.”
“028 Timeout! Logout Acknowledgement not received.”
“030 Logout failed because of RESTORATION mode Network.”
To Next Page
Loading...
Need help?
General
