AP4.4 Network Setup menu
AP4-4
Attach (See page AP4-21.)
Select the attachment file type to UNENCODE.
Delivery To: PC Mailer/Server (See page AP4-16.)
- PC Mailer : Received messages are sent to the PC in the LAN.
- Server : Received messages are sent to the mail server.
Server IP
When FELCOM 15 is connected to the mail server in the LAN, enter IP address of the
mail server.
Address Mode (See page AP4-18.)
- Fixed : The received message is sent to the address designated by “Mail
Address”.
- Auto : The received message is forwarded to the address which appears
just after the keyword in the message. When the keyword is not
found, the message is sent to the address set in “Mail Address”.
Mail Address (See page AP4-18.)
Enter the mail address to be sent when “Address Mode“ is set to “FIXED” or the
keyword is not found if “Address mode” is set to “Auto.
Mail Address Keyword (See AP4-18.)
Enter the keyword (up to 15 character long) if “Address mode” is set to “Auto. The
search of the keyword are made regardless of upper- and lower-case letters.
To Next Page
Loading...
Need help?
General
