Furuno FELCOM 15 - Page 191

AP4.10 E-Mail Client Setup
AP4-27
13. Click “Send” tab, tick “Plain Text” in “Mail Sending Format”, and select “Plain
Text setting” to set followings items. Then, click “OK”.
- MIME : Tick here.
- Encode text using : None
- Allow 8-bit characters in headers : Remove the tick.
14. Click “General” tab. Check “Check for new message every minute (S)” and
then set it to “5 minutes”.
Tick here.
Tick here.
Set to “NONE”.
Remove the tick.