5.10 Distress alert test
5-23
3. Press any [DISTRESS] on the Terminal unit, IC-305 and DMC-5 more than 4
seconds. The beep is sounded rapidly for 3 seconds. Then, it returns to the test mode
sound. The system is normal when the message below appears in “CAUTION”
window.
**Pressed [DISTRESS] button** **Message**
- Test for the Terminal unit : Distress Button work correctly.
- Test for IC-305 : Distress ALEART work correctly.
- Test for DMC : DMC work correctly.
4. To return to the original display, press [Esc].
For DMC-5, the message, “Wait for dist ack” is displayed. Turn off the unit once and
then set the DMC again.
To Next Page
Loading...
