FUTABA T18SZ - Page 170

170
＜ Data ＞
ŲƓƈƕƄƗƌƒƑƖŃƕƈƏƄƗƈƇŃƗƒŃƖƈƕƙƒŃƖƓƈƈƇ
Servo speed setting
The servo speed at each function
operation (including flight condition
switching) can be adjusted. The servos
operate smoothly at a fixed speed
corresponding to the set speed. The
operating speed (In side) and return speed
(Out side) can be set individually.
Switch the operation mode according
to the set function.
"Symmetry" mode: Used with ailerons
and other self neutral functions.
"Linear" mode: Used with functions
which hold the operation position of
the throttle and switch channel, etc.
[Setting method]
1. Select the mode ([Linear] or
[Symmetry]). Each time the button is
tapped, it toggles between [Linear]
and [Symmetry].
2. Tap the In or Out Speed button and
set the servo speed.
Initial value: 0
Setting range: 0~27
（First）0〜27（Slowly）
Inspeed
Outspeed
IncaseofSymmetry
IncaseofLinear
Outspeed
Inspeed
Symmetry
In
Speed
Out
Speed
In
Speed
Out
Speed
Linear
In
Speed
Out
Speed