FUTABA T18SZ - Page 177

177
＜ Data ＞
ŸƓƇƄƗƌƑƊ
Your Futaba T18SZ transmitter programming can be updated easily online. When functions are added
RULPSURYHGWKHXSGDWH¿OHFDQEHGRZQORDGHGIURPRXUZHEVLWH&RS\WKHXSGDWH¿OHVWRWKH6'FDUG
and then use the following procedure to update the program.
Check our web site for the FAQ regarding updating for more information.
Updating procedure
Note: If the battery fully discharges during
program updating, updating will fail. When
the remaining battery capacity is 50 or
less, always recharge the battery before
updating.
Note: The model data in the transmitter can
be used unchanged after updating, but to
be safe, back up the model data before
updating.
1. Download the zip file of the update data
from our website.
2. Extract the zip Àle on your computer.
3. The "FUTABA" folder will be created on your
computer.
4. Copy the "FUTABA" folder into your SD card.
Note: If the SD card has already had "another
FUTABA" folder before you make a copy, the
"FUTABA" folder is OVERWRITTEN.
5. Insert the SD card with "FUTABA" folder that
contained the update software into the SD
card slot on your T18SZ radio transmitter.
6. Turn on the transmitter power while pressing
down the "HOME/EXIT" button. The update
screen appears on the LCD display of your
T18SZ and the software update is started.
FutabaWEB
18SZUpdateZipfile
Download
Copythe"FUTABA"
folderintoyourSDcard.
InstalledSDcardofthe
updatefile
PresstheHOME/EXITswitchandturnon
Updating
1
2