FUTABA T18SZ - Page 22

22
＜ BeforeUse ＞
ŷƒƘƆƋŃųƄƑƈƏ
ūŲŰŨŒŨŻŬŷŃƄƑƇŃŸőŰŨűŸŒŰŲűőŃ
HOME/EXIT
Button
U.MENU/MON.
Button
Tap the panel with your finger to enter
data.
3ODVWLF¿OPLVDWWDFKHGWRWKH7RXFK3DQHO3OHDVH
be careful so that you don't scratch the Touch Panel
ZLWKDQ\WKLQJKDUGVXFKDVDPHWDOREMHFW'RQW
push the Touch Panel with excessive force or drop
anything on the panel.
$OWKRXJK\RXPD\¿QGVRPHDLUEXEEOHVXQGHUWKH
plastic panel due to environmental changes such
as temperature, it is not a defect and will cause no
problems.
*
Color LED is made from many pixels.

Some
pixels hold lighting. Moreover, some pixels go out.
And a screen may flicker. Such condition is the
characteristics of color LED. It is not failure.
Press Tousermenudisplay
Pressandhold Toservomonitordisplay
HOME/EXIT
U.MENU/MON.
Press
Returntotheprevious
screen
Pressandhold Returntothehomescreen
PressfromHOME
screen.
ToTelemetrydisplay
Pressandholdfrom
HOMEscreen.
Panellock/Lockrelease
Tappingthesettingsbuttonsfor
eachvalueonthesettingsscreen
willcausevalueinputbuttonsto
appearatthetopofthepanel.
Valueinputbuttonsdisplayatthe
topofthepanel.
Pressingandholdingavaluewill
returnittoitsdefaultsetting.
Smallchange
invalue
Largechange
invalue
Largechange
invalue